$

  • Compatible with all sonsorless brushless motor.
  • Use top quality electronic components to enhance the current endurance ability of the   ESC.
  • Excellent start-up, acceleration and linearity features.
  • With 2 running modes (Racing mode and Forward/Backward mode).
  • With 4 steps of maximum reverse force adjustment.
  • Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.
  • With 4 start modes (Also called "Punch" ) from "Soft" to "Very aggressive".
  • Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
  • With 8 steps of timing adjustment to get the best compatibility with various of motors.
  • Easily program with only one button and compatible with pocket-sized program card.

share


$59.00
AUD $59.00
    • Output: Continuous current 60A, burst current 380A.
    • Input: 4-9 cells NiMh/NiCd or 2-3 cells LiPo. Note1
    • BEC Output: 6V/1.5A.
    • Resistance: 0.00075 Ohm.
    • Motor Supported: Sensorless Brushless Motor
    • Suitable Brushless Motor: 5.5T and > 5.5T
    • Suitable Car: 1/10 on-road or off-road cars / trucks for normal race or sportful race.
    • Size: 31.5mm(L) * 27.5mm(W) * 24mm(H).
    • Weight: 32g(Without wires)

    Note1:
    For 4-6 Cell Ni-xx: You needn't change the fan coming with the ESC;
    For 7-9 Cell Ni-xx: You must change the fan because it cannot work with such a high voltage, so please choose a high voltage fan or supply the fan from the receiver (+6V);

    • 1 x ESC
  • Domestic Shipping starts at $13.00 for this item plus $0.00 for each additional item . International Shipping starts at $19.99 for this item plus $14.00 for each additional item. Shipping availability to your country and Total Shipping will be finalized at check out.